Different Ways of Refinishing Hardwood Floors
There are many reasons as to why you should use hardwood flooring materials for your floor but also there is a responsibility that comes with the benefits. The reason why it is great responsibilities because, with time, it can wear off meaning you either need to replace or refinish them. You should conduct some inspections to define if you will replace the hardwood flooring materials or refinish them. When it comes to refinishing your hardwood floor, you can decide to do-it-yourself or engage professionals to do it. Continue reading below to learn more about different steps to refinishing hardwood floors.
The first step to refinishing the hardwood floor is by collecting the necessary materials. There are a number of materials that you need to purchase which can include oil-based stains, shop rags, shop vac, sandpapers, stain application pads, furnish foam rollers to name but a few. Getting the appropriate materials is necessary and that is why if you don’t understand much about the refinishing materials, engage a professional for advice. To start the process of, you need to remove objects that are on the floor including carpet tacks and nails.
After removing the object from the floor, you should know surgery floor using the 60-grit sandpaper and the belt sander. The same procedure should be repeated more than once with different sizes of sandpapers and afterward use the shop vac in removing the dust in the debris.
The step that will follow flow sanding will be water popping. Water popping is meant to get the wood wet to raise the grain. Primarily, water popping is willing to help in helping the wood absorb more of the stains. Water popping is possible by dipping the shop rag in water then using it to wipe the floor.
The next step is to stain the floor used oil-based stains and the stain applicator pads. After applying the first coating of oil-based things, you should give it 24 to 48 hours to dry up. After the oil-based stains have dried up, you should apply the polyurethane using the foam roller then allow it two hours to dry.
Now after you are done with the coating, it is time you start the buffing using the 220-grit screen. After buffing, you should wipe the floor so that you can apply the second coating using polyurethane of what you should repeat this same process for 3-4 times. At the end of the process. Therefore, you discover that you of a new floor. If you want to get more info on how to make the hardwood floor last long, there is a lot of info on the Internet.
More information: my link